Technical Machine Sales Inc. | 521 Delia Drive |  Longview, Texas | 75601

Phone (903) 753-1955

Vertical & Horizontal Milling Machines - Used

Manufacturer:Supermax
New/Used:Used
Price:$4,500 F.O.B. Longview, Texas

SPECIFICATIONS:
Table Size: 9" X 42"
T-Slots: 3 on 2-1/2"
T-Slot Size: 5/8"
Table Height Above Floor: 47-1/4"
Speed Range Direct Drive: 60 - 4200 RPM, Infinitely Variable
Speed Range Back Gear: 80 – 550 RPM, Infinitely Variable
Table Travel (X-Axis): 30"
Saddle Travel (Y-Axis): 12"
Quill Travel: 5"
Knee Travel (Z-Axis): 18"
Ram Travel (in & Out: 12"
Quill Diameter: 3.375"
Spindle Taper: R8
Spindle Diameter: 1.875"
Spindle to Column, max.: 23"
Motor: 2 HP
Approx. Weight: 2100 lbs.


Manufacturer:Kondia
New/Used:Used
Price:$3,890 F.O.B. Longview, Texas

SPECIFICATIONS:


Table Size 9" x 42"
Table travel 28"
Saddle travel 15"
Quill Travel 5"
Power Feed Quill 3, steps
Table power feed Variable speed
Belt Speed Range 85 to 3000 rpm, 8 Step V-Belt
Electrics 220/440/3/60
Approximate Weight 2,200 Lbs.

EQUIPPED WITH:


Digital Read Out, Sino, Bolt Circle Software
Power Feed Longitudinal, Variable Speed
1 Set of Collets, 1/16" through ¾"
Hold Down Set
Work Light


Manufacturer:MSC
Item Number:2258
New/Used:Used
Price:$8,250.00 F.O.B Longview, Texas

SPECIFICATIONS:
Table Size: 9" X 42"
T-Slots: 3 on 2-1/2"
T-Slot Size: 5/8"
Table Height Above Floor: 47-1/4"
Speed Range Direct Drive: 60 - 4200 RPM, Infinitely Variable
Speed Range Back Gear: 80 – 550 RPM, Infinitely Variable
Table Travel(X-Axis): 30"
Saddle Travel(Y-Axis):12"
Quill Travel: 5"
Knee Travel(Z-Axis):18"
Ram Travel (in & Out:12"
Quill Diameter: 3.375"
Spindle Taper: R8
Spindle Diameter: 1.875"
Spindle to Column, max.:23"
Motor: 2 HP
Approx. Weight: 2100 lbs.

EQUIPPED WITH:
Digital Read out: Mitutoyo 529 Series
Power feed on x-axis


Manufacturer: Kearney and Trecker
Item Number: 2271
New/Used: Used
Price: $6,000.00 F.O.B Longview, Texas

SPECIFICATIONS:

Table:
Working Surface (exclude coolant troughs) – 10-1/4” x 64”
Size Overall (Length and Width) – 15-1/2” x 74”
T-Slots (Number and width at top of table) – 3” x ¾”
Distance between Centers (Center to center) – 3-1/2”
Swivel of Table – 60 Degrees each direction

Range:
Longitudinal Travel - 48”
Cross Travel - 12”
Vertical Travel - 18”
Spindle Speeds - 20 to 1000 RPM
Spindle Taper - 50
Table Feeds (Number and Range) – 16, ½” to 30 IPM
Electrics:
Voltage – 220/3/60
Main Drive Motor – 10 HP

Includes:
Vertical Head
Manual
Misc. Tool Holders