ONE (1) USED ACME, 63 KVA, ISOLATION, 480/240/3/60

​New/Used: Used
Price: $1,750.00

Tengzhou Wellon Horizontal Rotary Table Model TS250A
Item Number: 2298
New/Used: USED
Price: $350.00 FOB LONGVIEW, TEXAS


Specifications:
Diameter: 9.84”
Morse Taper of Center Hole: MT3
Diameter of Center Hole: 1.18”
Width of T Slot: 1/2”
Width of locating key: .55”
Adjacent angle of T-Slot: 60 degrees
Transmission radio of worm gear: 1:90
Max Workload: 440 lbs.
Weight: 75 lbs.


           

               


WILTON MODEL 1275N VERTI LOCK MILLING MACHINE VISE
Item Number: 2297
New/Used: USED
Price: $375.00 FOB LONGVIEW, TEXAS

Specifications:

Jaw Width: 6”
Jaw Height: 1-3/4”
Max Jaw Opening: 7-1/2”
Jaws Thickness: 3/4”
Fixed Jaw: 85,000 PSI
Sliding Jaw: 70,000 PSI
Ductile Alloy Vise Body
Flamed – Hardened Bed
Length: 19.7”
Width: 10.7”
Height: 6.7”
Weight: 75.25 lbs.
Coolant Troughs       







Angle Plate, Cast Iron, Four Vertical Slots
Item Number: 2302
New/Used: USED
Price: $550.00 FOB LONGVIEW, TEXAS


Specifications:
Height                            18”
Width                             8”
Length (front to back)   10”
Slots, 4 places                ¾” wide x 6 ½” long




           

               


ONE (1) USED MGM, 45 KVA, GENERAL PURPOSE, 480/240/3/60

​New/Used: Used
Price: $1,100.00

Butterfly Valves
New/Used:Used
Price: $300.00 Each

Specifications:

4 inch Series 31 Used Butterfly Valves
Material: Cast Iron Body, Phos. Steel Shaft, Nulon D-Iron Disk, Buna-N food grade Seat
Hydraulic Actuator, Mfg. by Flo-Tork
Actuator rotation 94 degrees
Actuator max PSI 3000

Three in Stock
Mfg. by Brady

Condition Good


Centrifugal Pump
New/Used:Used
Price: $6,500 F.O.B Longview, Texas

Pump:

ITT – AC Pump – 6E4PEL
Mounted on base w/coupling and guard.
Pump S/N 1-840205
Seal#2535720
Impeller Diameter – Full
36 PSI (84 feet of head)
GPM 1200
John Crane hot water seals
Self Priming

Motor:

Toshiba Houston
Model No. B0304FK1HLR,
Motor S/N AC62955-4
30 HP, 220/380
3 Phase, 50 Hz

Location:
Located in Longview, Texas in Warehouse.

Condition:
Good


Tooling, Accessories & Misc - Used

ONE (1) USED ACME, 75 KVA,GENERAL PURPOSE, 480/240/3/60

​New/Used: Used
Price: $1,500.00 F.O.B. Longview, Texas

2 Ton Ratchet Type Arbor Press
Item Number: 2298
New/Used: USED
Price: $250.00 FOB LONGVIEW, TEXAS


Specifications:
Capacity: 2 Ton
Height of press: 18-1/2”
Max Work Diameter: 11-7/8”
Arbor: 1-1/4”
Capacity Over Table: 8-1/2”
Weight: 86 lbs
With Steel Work Table


           

               


HUTH PORTABLE SWAGGER EXPANDER MODEL 1673
Item Number: 2279
New/Used: USED
Price: $3,250.00 FOB LONGVIEW, TEXAS


Specifications:
5 H.P. Motor
25,000 lbs. of expanding power
3-1/2” cylinder
Expanding capacity from 1” to 5-1/2”
Huth’s Accu-Sizer System
Adjustable Collar for expanding 1” – 3-1/2”
Collet holder for 1” to 2-1/2” O.D. tubing
Swaging capacity from 1” to 3”
Front swivel casters
15’ power cord
Compact design – 40” H x 37” L x 24” W







Angle Plate, Steel with Base Plate and Threaded Holes
Item Number: 2303
New/Used: USED
Price: $400.00 FOB LONGVIEW, TEXAS


Specifications:
Height - 13”
Width - 8”
Length - 9”
Baseplate - 8” wide x 16” long, welded to angle plate
Threaded holes - 5/8-11 through holes




           

               


BT40 TOOL HOLDERS WITH STORAGE CART
Item Number: 2286
New/Used: USED
Price: $2,651.00 FOB LONGVIEW, TEXAS

Specifications:
BT4O TOOL HOLDERS, HARDINGE VMC 1000                         QTY                         MFG
WE 5/8-120 (DIAMETER AND LENGTH IN MM)                           1                            NIKEN
WE 3/4-65                                                                                        1                           NIKEN
WE 1-85                                                                                           1                           NIKEN
WE 7/8-85                                                                                        1                           NIKEN
WE 1/2-65                                                                                        1                           NIKEN
WE 5/8-65                                                                                        1                           NIKEN
WE 1 1/2-110                                                                                   1                           NIKEN
WE 1/8-120                                                                                      1                           NIKEN
WE 7/8-120                                                                                      1                           NIKEN
WE 5/16-65                                                                                      2                           NIKEN
WE 3/8-65                                                                                        2                           NIKEN
WE 1/4-65                                                                                        2                           NIKEN
WE 1/2-12O                                                                                     1                           NIKEN
WE 3/8-120                                                                                      1                           NIKEN
WE 5/16-120                                                                                    1                           NIKEN
WE 3/16-120                                                                                    1                           NIKEN
WE 1/4-120                                                                                      1                           NIKEN
WE 1/2-65                                                                                        1                           NIKEN
WE 3/16-65                                                                                      1                           NIKEN
WE 3/4-120                                                                                      1                           NIKEN
WE 1-120                                                                                          1                          NIKEN
WE 1 1/4-85                                                                                      1                          NIKEN
MTA 4-95 (MORSE TAPER)                                                            1                          NIKEN
MTA 3-75 (MORSE TAPER)                                                            1                          NIKEN
MTA 2-60 (MORSE TAPER)                                                            1                          NIKEN
NPU 13-80 (DRILL CHUCK, KEYLESS 3/8" CAPACITY)               3                         NIKEN
Z12-90 (FLOATING TAP HOLDER, COLLET 3/8")                         1                         NIKEN
FMD-25.4-45 (SECO SHELL MILL, 4 CARBIDE INSERTS) 3"       1                         NIKEN
COLLET CHUCK, 917754 W/1" COLLET 7 END MILL                   1                     UNIVERSAL
COLLET CHUCK, 5/8" COLLET                                                       1                     UNIVERSAL
HEAD, DBL-203                                                                                 1                      CRITERON



API Gauge - 5 1/2 BTC RING
New/Used: New
Price: $1,386.00 F.O.B. Longview, Texas


Centrifugal Pump
New/Used:Used
Price: $8,000.00 F.O.B. Longview, Texas

SPECIFICATIONS:

Pump
ITT – AC Pump – 6E4PEL
Mounted on base w/coupling and guard.
Pump S/N 1-23541-01-1
Impeller Diameter – Full
36 PSI
GPM 1200
PDH
Motor
Toshiba Houston
Model No. B0304FLF1UMB,
Motor S/N AC89844-1,
30 HP,  220/440
3 Phase, 60 Hz


Centrifugal Pump
Item Number:1519-1
New/Used:Used
Price: $6,500 F.O.B. Longview, Texas

Pump:

ITT – AC Pump – 6E4PEL
Mounted on base w/coupling and guard.
Pump S/N 1-840206
Seal#2535720
Impeller Diameter – Full
36 PSI (84 feet of head)
GPM 1200
John Crane hot water seals
Self Priming

Motor:

Toshiba Houston
Model No. B0304FK1HLR,
Motor S/N AC62955-2
30 HP, 220/380
3 Phase, 50 Hz


Technical Machine Sales Inc. | 521 Delia Drive |  Longview, Texas | 75601

Phone (903) 753-1955

Bison  8" 360 Position Super Indexing Spacer Chuck
Item Number: 2299
New/Used: USED
Price: $1,700.00 FOB LONGVIEW, TEXAS


Specifications:

Indexing Accuracy - 45 sec.
Squareness (Base to Chuck) - .0009" Max.
Parallelism Over Face - .0009" Max.
Concentricity of Chuck - .0015 Tir.


Catch device allows you to perform basic indexing in divisions of 2, 3, 4, 6, 8, 12 & 24 without changing masking plates

Designed for milling, drilling, jig boring and related machining operations

Simple and compact construction provides for 2 types of dividing

Angular indexing can be performed through the graduation ring from 0° to 360° in increments of 1°




           

               


ITW-MIMA SEMI AUTOMATIC TURNTABLE STRETCH WRAP SYSTEM SERIES 5, MDL 5.1
New/Used: USED
Price: $7,500.00 F.O.B. Longview Texas

Specifications:
Electical Power – 115 VAC
Dimensions – 60” W x 102” L x 90” H

Load:
Size – 52” x 52” palletized load (73” maximum diagonal)
Weight – 5,000 lbs.
Turntable:

Dimensions – LP – 60” Round, HP - 48” Octagonal
Suspension – LP – Ring Bearing, HP - Friction drive with casters

Lubrication – LP – Two Points, external access, HP – Single point per caster
Motor -  LP – 1 HP, 90 VDC, HP – 3/4 HP, 90 VDC
Speed – 15 RPM Max
Elevator:
Motor – 1/2 HP, 90 VDC, Gearmotor
Powered Prestretch System:
Motor – 3/4 HP, 90 VDC
Stretch Level – 250% (fixed)
Film Roll Size – 20” wide x 10” diameter

The Model 5.1incorporates a forklift portable design and utilizes the same heavy duty formed steel tower with an integrated control panel. Featuring a variable speed 1-12 RPM turntable with a 3/4 HP drive motor, the 5.1 is capable of wrapping 4500 loads at a rate of 30 loads per hour. The 5.1 is designed for the toughest of environments. A PLC with operator interface and message display is standard as is the Pace Series film carriage. The operator friendly controls let the machine do the work with minimal operator assistance.