One Used Pines #2 Hydraulic Rotary Tube Bender

Serial # 11235-95203
Year 1997

Machine Specifications:
-L.H. (Counter-Clockwise Rotation)
-Hydraulic Mandrel Extractor
-Push Button Controls, PLC, Digital display, Pressure Die Assist

Max. Radius ...................................................................................................12"
Max. Bend Angle.............................................................................................180 Degrees + Overbend
Max. Tube Length Over Mandrel .................................................................... 7'- 5"
Hydraulic Reservoir Capacity........................................................................... 55 Gallons
Machine Weight...............................................................................................Approx. 4600 lbs.
Machine Length.............................................................................................. Approx. 10'-6"
Machine Width............................................................................................... Approx. 48"
Machine Height...............................................................................................Approx 48"

Bending Capacity:
- Round Tubing Mild Steel ...............................................................................3"x .109 wall
- Round Tubing Stainless Steel ........................................................................ 3"x .065 wall
- Steel Pipe ..................................................................................................... 2" Schedule 80
- Square Tubing Mild Steel .............................................................................. 2-1/2" x .083 wall
- Rect. Tubing Mild Steel E-Plane ....................................................................1-1/2" x 3" x .148 wall
- Rect. Tubing Mild Steel H-Plane ....................................................................1-1/2" x 2-1/2" x .120 wall
- Round Bar Mild Steel ....................................................................................1-7/8"
- Square Bar Mild Steel ...................................................................................1-11/16"

Parker Hydraulics, Pumps, directional valves and flow controls

Tooling:

Bend dies, 3" tube, 6" CLR

Clamp dies, 3" tube, carbon and stainless

Mandrels, Carbon and Stainless, 3" OD x .049 through .065" wall

Wiper Dies, 3" tube diameter

Price, FOB Longview, Texas (As is where is)...................................................$65,000.00

One (1) Used Horn HMT#3 CNC Rotary Hydraulic Tube Bending Machine, 5" capacity, tooled for 3" Tube

Model: HMT-#3
Year: 2002
Serial#: 023L1110-B

Capacity:
Non-Ferrous Tubing YP to 25,000 psi 4" OD x .187" wall
Steel Tubing YP to 25,000 psi 4" OD x .109" wall
Stainless Steel Tubing YP to 60,000 psi 4" X .083" wall
Square Steel Tubing 2-1/2" x 2-1/2" x .187 wall
Rectangle Steel Tube 1-1/2" x 3 x .250 wall
SCH 80 Extra Heavy Pipe 3"

Max Radius: 15" Clr
Max Tube over Mandrel: STD 144"
Max Bend Degree: 190°
B Axis Travel: 360°
Y Axis Travel: 120"

Speed:
Bend Arm: 6 Rpm
B Axis Speed 30 Rpm
Y Axis Speed 2800 IPM

Dimensions: 8'W x 18'L x 6'H
Weight: 17,000 LBS

Rotation: Counter Clockwise

Equipped With:
Automatic plane of bend carriage with digital servo motors
Adjustable overhead tie bar to pressure die arm
Drop away swing arm with clamp holder
Steel slides with ground steel and new bronze alloy wear strips
Direct activated pressure die closure
Pressure die assist with independent pump
Programmable pressure control of pressure die assist
4" Hardinge collet chuck with a set of pads
Wiper Die base with holder
Parker Hydraulic cylinders, valves, filters, hoses, and pumps
Hydraulic cooling system with digital temp readout and over temp alerts
Main drive Motor-40 Hp, 480 VAC
Parker servo valve for bend arm
Reverse acting hydraulic mandrel extractor with proximity position sensors
Bijur lube system, lines, hoses, meter units, and fittings
Safety floor mats
Hollow mandrel rod and auto lube system
Operation manual

Controls:
Adaptive motion control
PC based control system
Memory storage of unlimited part programs
All electrical components

Tooling: (All for 3" O.D. Tube)
2- Bend dies
2- Clamp dies
2- Pressure dies
2- Mandrels
5- Wipers
12-3" O.D. balls

Price, FOB Longview, Texas (As is where is)............................$120,000.00